|
| |
|
|
Piezoelectric nanofiber materials for wearable electronics
Frolíková, Štěpánka ; Škarvada, Pavel (referee) ; Macků, Robert (advisor)
This thesis deals with the influence of production parameters on the morphology of PVDF nanofibers produced by electrospinning. Nanofibers are generally a widely used material, nanofibers are generally a widely used material, they can also have piezoelectric properties, which gives them a specific spectrum of use, eg in biosensors. The production of nanofibers was realized by electrospinning. A scanning electron microscope was used to examine the morphology and surface properties. The aim of this thesis is to compare the properties of PVDF nanofibers produced under different settings of production parameters.
|
|
|
PiezoLegs motor in medical aplication
Plass, Petr ; Koláčný, Josef (referee) ; Ondrák, Tomáš (advisor)
The Bachelor’s thesis is focused to explain of basic conceptions of piezoelectric motors including principles of piezoelectric effect. It is analysed velocities of movement of PiezoWave motor during loading and he is valued supply voltage of used demo driver. Then it is considered of drive with stepper motor and DC motor, it is compared them with piezoelectric motor and chosen the best alternate for the drive of a pump of the artificial heart. Then it is introduced with working in a program i-Speed 2 to analyzing of shots catch by the high speed video camera and it is given a basic manual to connecting, setting and programming of the drive connected to the EPOS P driving unit.
|
|
|
Proposal of piezo-generator inside button
Kučera, David ; Houška, Pavel (referee) ; Hadaš, Zdeněk (advisor)
This bachelor’s thesis deals with proposal of piezo-generator inside button. There are described types of piezo-generators, explained piezoelectric effect, types of piezoelectric material with focus on piezoceramics. The properties of piezoelectric ceramics are described. Proposal of piezo-generator inside button is described at the end of this thesis.
|
|
|
Surface acoustic wave filter
Tichý, Jakub ; Dědková, Jarmila (referee) ; Raida, Zbyněk (advisor)
The theoretical part of this thesis deals with principles and characteristics of the surface acoustic wave filter. It explained the principle of magnetostriction and piezoelectric effect, which uses a filter. In the practical part in the program Comsol Multiphysics are made three simple models of SAW filter. Some modes are founded and are compared to previously known results. In the next phase of project is further studied using the parametric analysis. In the last phase of project is applied global optimization PSO at admittance characteristic from simple 2D structure. The results are compared with the commercially produced devices.
|
|
|
Preparation and optimization of electrospun materials suitable as electricity generators
Pokorná, Romana ; Holcman, Vladimír (referee) ; Tofel, Pavel (advisor)
This master's thesis is focused on energy harvesting and is divided into two parts: theoretical and practical part. The theoretical part of the thesis contains the dielectric parameters, the meaning of the piezoelectric and triboelectric effect and the principles of electric energy gain in energy havesting. The last chapter of the theoretical part is devoted to various electrospun materials suitable for energy harvesting. The practical part of the work deals with nanofibers as an energy generator and describes their dielectric parameters. In this part the relative permittivity and loss factor of selected types of nanofibers are measured. Also the triboelectric nanogenerator is made and it's properties are measured.
|
|
| |
|
|
Penile plethysmography
Koudelková, Zuzana ; Harabiš, Vratislav (referee) ; Hrozek, Jan (advisor)
This bachelor´s thesis focuses on methods that examine volumetric changes of genital organs (especially for volume changes in male sexual limb). These changes are used in the sex diagnosis. The most common type of examination is to determine sexual preference of the patient. The aim of this work is to describe how have been the changes investigated previously and how they are investigating in the routine practice now. Find out which are their limits. Try to build a new type of sensor which could help to better evaluate the volume changes. And try to create a program in LabVIEW environment in which the measured data is displayed and stored.
|
|
|
Impact hammer calibration
Šafář, Jakub ; Havránek, Zdeněk (referee) ; Beneš, Petr (advisor)
The aim of this thesis is verification of sensitivity of an impact hammer ENDEVCO 2302-5. The tesis also discusses the possible negative influences of the experiment. Calibration of an impact hammer was performed using known mass.
|
|
|
Development of PVDF nanofibers sensor
Klásek, Matyáš ; Tofel, Pavel (referee) ; Hadaš, Zdeněk (advisor)
This diploma thesis deals with the feasibility of using PVDF nanofibers as an active sensor layer generating electrical signal. PVDF and related electromechanical effects are described. A research study is conducted regarding existing PVDF nanofiber applications and based on it, an event sensor design utilizing triboelectric effect and electrostatic induction is proposed. The electrical response of the layers is experimentally investigated and a pulse detection algorithm is conceived and implemented. Finally, a way of integrating the sensor into a rail track is proposed.
|
guest ::
